Kalmar DCG 100-6

Technical Description:
Model:
– DCG 100-6, WB 3.00 m
Capacity: 10000kg @ 600mm load center
– Kalmar EGO Cab,
Complete with all instrumentation
Warning lamps: Battery charging, blinkers, warning lights, parking brake. Display for drive train monitoring system including alarms.
Only for diesel forklift: Display all parameters of engine and transmission. Display: battery level, engine oil pressure, engine coolant temperature, transmission oil temperature, fuel level, operating time.
Only for electric forklift: Display parameters of time (12h/24h), cabin temperature (degrees C/F), engine RPM / Hydraulic pump motor RPM,
ECO Gaugelevel / Energy consumption kW, Vehicle speed(km/h or mph), Operatings hours, Fuel level / battery state of charge SOC,
Traction motor left/right temperature(C/F degrees), hydraulic pump motor brake ACC/AC temperature(C/F degrees),
hydraulic pump motor hydraulics temperature (C/F degrees), Hydarulic oil temperature (C/F degrees),
Water heater ECC temperature (C/F degrees), Battery voltage, ECO Drive Mode,
Mechanical suspension, 4-way adjustable, cloth driver seat with seat belt.
Tilt steering wheel with multiple positions.
Two (2) ergonomically positioned, multi-function levers on steering column.
-Heavy duty, gear changing/directional switch.
-Windshield wipers and washers: front , roof, and back pane.
-Horn and blinkers.
heat control. Multi-speed cab heater/defroster for adjustment of heat and air.
One (1) internal rear view mirror.
6 cylinder turbo diesel engine
Altenator current 70A
Cabin:
– Tuner FM Rotating beacon, adjustable LED type
Located by the cabs left rear corner. This beacon is adjustable in height which is an advantage when the truck is operating in environments where height is limited. Controlled by a button on the dashboard.
Mast:
– Three-stage free-lift mast with “Through-vision” design. Free lift is 1/3
of the lifting height (H4).
Overall mast height, lowered = 3330 mm
Overall mast height, fully extended = 6950 mm
Maximum lift height, forks = 5500 mm
Maximum free-lift height, forks = 1830 mm
Mast tilt angles – 10° backward / 5° forward
De-rate capacity statement:
xxx lbs. capacity @ xx load center, up to 5000 mm lift height, forks
xxx lbs. capacity @ xx load center, up to 5500 mm lift height, forks
De-rate to be confirmed by Kalmar

Carriage:
– Roller-type carriage with sideshift and simultaneous fork-positioning
Sideshift = 440 mm maximum at forks outside to outside edge 1450 mm Fork- positioning:
– Minimum, outside to outside edge, = 570 mm
– Maximum, outside to outside edge, = 2330 mm
Width, edge to edge = 2450 mm

Forks:
– Fork dimension 200 x 70 x 2200 mm
The forks tapered 200 mm from the front face of fork to tip 10 mm when Lmm. The forks tapered 600 mm from the front face of fork to tip 15 mm when L=1700
– Roller-type fork mountings for sideshift and fork-positioning carriage
Steering Axle:
– Heavy duty Kalmar designed steer axle with double-acting steering cylinder.
– This provides high strength and durability.

Drivetrian:
Two stage filter with integrated pre-cleaner and service indicator in cab display. Drive axle
Heavy duty
Wheel and differential hub reduction.
Service brake
Maintenance free oil-cooled wet disc service brakes.
Parking brake
Spring actuated dry-disc parking brake located on the drive line.
Cooling system
Visco clutch cooling fan

Hydraulics:
Two variable displacement axial piston pumps (1. Lift/tilt; 2. Steering/load handling) provide on-demand hydraulics for load handling and steering,
resulting in quicker response, higher lifting speed, longer life, less noise,
less heat and better fuel economy, with a priority valve prioritizing oil
supply to the steering system for effortless control.
Gear pump for brake system and cooling fan.
Electro servo controls with proportional valve for smooth load handling
functions.
Canister style high pressure filtration for easier service.
Double sealed hydraulic cylinders with wipers for protection and longer life
Hydraulic oil level sight glass on tank side.

Selected options:
– Extra hydraulic function incl. Hoses. One additional hydraulic function is.
Installed in the carriage.
This option is for those instances when extra
hydraulic functions are needed for example for different carriages.
When selecting individual fork positioning
left fork and right fork one extra hydraulic function is required.
Not possible to add more than one hydr function together with SS-carriage
– Push button controlled hydraulic function via solenoid valve
– Hydraulic accumulator/damping for lifting function.
– Cooling hydraulic system
Electrics:
24 V electric system
Fully redundant CAN-bus system
Weatherproof connectors
Control units and fuses protected within an easily accessible and
weatherproof cabinet on side of chassis.
Braided wire looms protect wire harnesses and do not trap moisture
Lighting
Two (2) working lights mounted on mast
Two (2) rear lights, backward direction, mounted on back of cab
Two (2) working lights on front mud guards
Two (2) tail lights/brake lights, mounted on counterweight
Four (4) blinkers
– two mounted on front mud
– two mounted on counterweight

Tyres and rims:
The rims are interchangable between the steer and drive axles.
Type: Drive wheels 4 pc Pneumatic: XX.00 x 2X
Type: Steer wheel 2 pc Pneumatic: XX.00 x 2X

Colour:
Chassis Red KALMAR RED 3000
Cab Grey KALMAR GREY RAL 7011
Mast, carriage, forks Black KALMAR BLACK RAL 7021
Decals/logos/stripes White KALMAR WHITE RAL 7047
Extra equipment:
– Automatic central lubrication – 14 points
8 points on the steering axle
6 points on the mast

Triplex H4=5500 90-6–140-6 H2=1830 H3=3330

Sidesh/forkpos W=2450 90-6–140-6**

200*70*2400

Mountings f sidesh./forkpos. carriage 90-180 (rollertype)

Extra hydraulic function incl hoses per function